Anton Sprint Pro - Sprint Pro Menu Structure Diagram; Menu Navigation Flow

7
Sprint Pro Sprint Pro Orientation
The soft keys control the function displayed above them on the screen. These
will change depending on the test or menu, or if the ESC key is pressed.
To display Sprint Pro serial number, identity and software version press the ESC
key from the Main Menu.
The menu structure is shown below:
Test Menu
Main Menu
Flue Gas
Analysis
Gas Escape
Detection
Room
Safety
Diff
Temperature
Pressure
Menu
(Not available
on Sprint Pro 1)
Let-by / Tightness
Pressure
Diff Pressure
Working Pressure
Operating Pressure
Analyser Settings
Pressure
Units of Measurement
Temperature
Stored Logs
Browse
Today’s logs
Browse
all logs
Delete
all logs
Press ESC to go
to Main menu
Key clickAuto off
CO
2
Zero*
timeout
Supervisor
settings
Efficiency
Set time
& date
Edit report
header
Change
password
Find log by
test & date
Back Light Report Mobile app
Appliance
Sweep
Ambient Air
Monitoring
Find log
by number
Fuel Options
Zero Gas Sensors
Information
*only available when CO
2
sensor fitted.