6
Quickstart guide Sprint eVo
1
/eVo
2
/eVo
3
Using the menu
From the Test Menu press the ESC key to display the Main Menu. Use the soft
keys to scroll, select and edit menu items (see icon list - inside front cover). Press
accept þ to make a change or the ESC key to cancel. Press the ESC key to return
to the Main Menu.
Changing fuel, units and efficiency options
From the Main Menu select Fuel Options or Units of Measurement.
Fuel Options: select one of the following options: natural gas, LPG, heavy oil,
light oil, coal, wood, coke, Biomass, Bagasse and wood pellet dry.
Units of Measurement: select one of the following options:
Pressure units (eVo
2
and eVo
3
only): mbar, Pa, hPa, kPa, PSI, inWG,
mmWG, inHG or mmHG
Temperature scale: Centigrade or Fahrenheit
Efficiency: Net, Gross or NetHE*
*NetHE may be used for High Efficiency/Condensing boilers
NetHE not available on all fuel types
See section II. Setting up for more details.
Changing display and key pad settings
From the Main Menu select Analyser Settings and one of the following options:
Auto off timeout: use the soft keys to adjust or disable the timeout period.
Back light: use the soft keys to select one of the following options: off, dim or
bright.
Key click: use the soft keys to enable or disable audible key click.
Supervisor Settings: See below.
Changing date & time, report header and password
From the Main Menu select Analyser Settings>Supervisor settings: (if the
password has been set, enter the password now) select one of the following
options:
Set date & time: use the soft keys – and + to change units of date and time
and
è to select hours, minutes, day, month and year. Press ESC to save.
Edit report header: use the soft keys
é
and
ê
to select header text one or two
and
To Next Page
Loading...
Need help?
General
