To Next PageTo Next Page
Need help?Do you have a question about the Anvil FDM-19F02 and is the answer not in the manual?
General| Brand | Anvil |
|---|---|
| Model | FDM-19F02 |
| Category | Paint Sprayer |
| Language | English |
DANGER: Foam products contain flammable chemicals. Avoid open flames and ignition sources.
WARNING: Never point gun at people/animals. Do not discharge unless in use. CAUTION: Keep away from children.
IMPORTANT: Wear approved safety clothing, gloves, goggles, and mask with activated carbon filters.
NOTE: Always read and follow the foam manufacturer's instructions when using this gun.
Gun is designed for polyurethane foams for repair and building works, e.g., window replacement.
Lists the included parts: Spray Foam Dispensing Gun and Tip.
Steps for shaking the can, preparing the housing, and attaching the can to the gun.
Using the flow control knob to adjust bead size and trigger play for bead control.
How to meter foam dispensing by adjusting trigger pull and flow control knob.
Procedure for removing an empty can and loading a new one, including cleaning.
Detailed steps for cleaning the foam gun using cleaner solvent and removing residue.
Identifies all components of the dispensing gun with part numbers and descriptions.
