2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Pre-Installation .....................................3
Planning Installation ...............................3
Package Contents .................................3
Installation ........................................4
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance .......................................6
Care and Cleaning ..................................6
Service Parts .......................................7
Safety Information
Read the label and Material Safety Data Sheet carefully before use.
1. The foam dispensing gun products contain isocyanate and a
ammable blowing agent. Vapor may travel to other rooms.
Ensure adequate ventilation. Shut off all pilot lights and
extinguish open ames; eliminate all sources of ignition before
use. Do not smoke or use lighters or matches while dispensing
foam.
2. Do not breathe vapor or mist. Use in well-ventilated areas or
wear proper respiratory protection. Isocyanate is irritating to the
eyes, skin and respiratory system, and may cause sensitization
by inhalation or skin contact.
DANGER: Many foam products contain highly
inammable chemicals. Do not use in the proximity of any
open ames, cigarettes or any other potential cause of
combustion.
WARNING: Never point the gun at humans or animals and
do not discharge unless in use.
CAUTION: Keep the gun out of the reach of children.
IMPORTANT: Always wear approved safety clothing and
personal protection equipment: gloves, goggles for eye
protection, a mask with the appropriate activated carbon
lters when working with the foam gun.
NOTE: Always read the foam manufacturer’s instructions
when handling and using their product in conjunction with
this gun.
To Next Page
Loading...