Anviz M5 Quick Guide

5
Function Button
Communication
Notice: The operation will not delete user data stored in the device.
Green LED lights
up with 4 short beeps
Green LED lights
up with 4 short beeps
In orginal state
Blue LED flashes
Red LED lights
Register Management Cards (Enroll Card and Delete Card)
Swipe Enroll
Card
Swipe Delete
Card
Function Button
Press function button until you hear beeps which means the
information of Enroll Card and Delete Card have been
eliminated in the device.
After that, you MUST register management cards (Enroll Card and Delete Card) to run the machine.
If management cards are registed,indicator light turns yellow and flashes.You must verify any
management card first.
If no management card is registed, you can communicate with M5 directly.
Communication with M5 via USB port:

Anviz M5 Specifications

General

Brand	Anviz
Model	M5
Category	Security System
Language	English