General Information 6 (20)
2 General Information
The Anybus CompactCom Starter Kit is a development kit for the Anybus CompactCom plat-
form (chip, brick and module), which gives designers instant access to the capabilities of the
Anybus CompactCom range of products.
The kit allows both quick demonstration and in depth evaluation capabilities, and enables a po-
tential application to be designed and debugged into an advanced stage.
2.1 Package Contents
Depending on configuration, the Anybus CompactCom Starter Kit package consists of the fol-
lowing items:
• Configuration 1 (Anybus CompactCom M40/M30):
– HMS USB development board
– Power adapter with cable, 24 V
– USB cable
– Option board module
– Front cover
– Torx key T8
– CompactCom host connector
– Expansion board
• Configuration 2 (Anybus CompactCom M40/M30 without housing):
– HMS USB development board
– Power adapter with cable, 24 V
– USB cable
– Option board module without housing
– Mounting kit
– Torx key T9
– 3M connector
– Samtec connector
– Expansion board
• Configuration 3 (Anybus CompactCom B40):
– HMS USB development board
– Power adapter with cable, 24 V
– USB cable
– Option board brick
– Mounting screws (3 pcs) for brick and connector board
Anybus
®
CompactCom Starter Kit Reference Guide HMSI-27-224 2.0
To Next Page