Description 10 (20)
3.3 Expansion Board Overview
The Anybus CompactCom Expansion Board is plugged into the host application connector of
the development board and provides in-circuit access to all signals of the Anybus CompactCom
host interface, allowing in-circuit debugging and evaluation capacities. Any Anybus Compact-
Com , with or without housing, can be connected to this board.
The expansion board operates at 3.3 VDC, supplied from the development board connector.
Fig. 4
No Description
1 Connector to development board (host application interface)
2 See Host Interface Signals, p. 11
Anybus
To Next Page
Loading...
Need help?
General
