Page 5
MILOS-9 - English
Please note:
• If the headset is powered down, turning on the headset will auto reconnect the last used device.
• If the headset is disconnected but powered on, press MFB shortly to connect the link again.
• If there is abnormal loss of link happened (e.g. out of range), the headset will automatically try to reconnect the mobile phone several times.
• If the mobile phone cannot locate the network signal (e.g. out of reach), alert tone will be heard every 5 seconds in the headset.
(Not every mobile phone supports no network signal alert feature!)
• If there is no Bluetooth connection for more than 1 hour, the headset will switch off automatically.
5. Wearing your headset:
To Next Page
Loading...
