Anycom Milos-9 - Volume Control & Mute Function; Summary of Button Operation

Page 7
MILOS-9 - English
11. Volume control & mute function
• You can adjust the volume by pressing volume up or volume down button.
• To mute the microphone during an active call, press and hold both volume up and volume down button for about a second.
A periodic beep tone will be heard when the mute function is active.
• To deactivate the mute function, press and hold both volume up and volume down button for about a second.
A periodic beep tone will stop.
12. Summary of button operation
HEADSET STATUS
Button Action
Standby
(No Calls Active)
Incoming Call 1 Call Active
Quick Press - Answer Call End Call
2 seconds - Reject Call
Transfer Active Call to
mobile phone
MFB
3 Seconds Turn Headset ON/OFF Turn Headset OFF Turn Headset OFF
Volume UP Quick Press Increase Volume Increase Volume Increase Volume
Quick Press Decrease Volume Decrease Volume Decrease Volume
Volume DOWN
2 Seconds (4 tones) Last Number Re-Dial - -
The desired function is initiated on
l
y
when the button is released, so it is im
p
ortant that the button
i
s held for the correct
p
eriod of time.
!