11
date.
【NOTE】Please make sure to set the time/ date before
using. In case of any accident happens and to save the
date/ time accordingly. Thus to provide the effective
evidences.
◆Motion detection function
In the main interface, click “function setting” to enter the
setting interface. Click motion detection to turn on/ off the
function. Click the icon “ ” at the bottom of right to
return the main interface, the up of the left will appear the
motion detection. When the camera lens interact there is
a moving object, the Dash Cam will start video recording.
After 10s, when there is no longer moving object, the
Dash Cam will stop recording.
【NOTE】
A. If the motion detection function need to be used all the
time, please make sure the Dash Cam is with power
supply all the time.
B. Enter the setting to turn off the motion detection
To Next Page
Loading...
