12
function when the Dash Cam is not recording.
◆G-sensor fundtion
The Dash Cam has built-in G-sensor. In the main
interface, click the “function setting” enter the function
setting interface. Click video recording setting to find
“G-sensor”. Click G-sensor to set it. When recording, if
there is any shock(such as collision, crash etc..), the
present file will be saved automatically.
【NOTE】The sensitivity of G-sensor can be set as High/
Middle/Low. Please set it according to personal need.
◆Parking monitor
In the main interface, click the function setting to enter
function setting interface. Click the recording setting to
find parking monitor. When using parking monitor
function and the Dash Cam is off, if there is any little
shock of the vehicle, the Dash Cam will start recording
and the file will be locked. The locked file will not be
covered. The Dash Cam will power off automatically after
To Next Page
Loading...
