Anytek T12+ - Operating Modes and Functions; Video Recording Operation

8
【NOTE】Turn vehicles ignition to accessories, and the
Dash Cam will power ON and start recording
automatically, you will hear an audible tone once
powered.
◆Video operation
1. Turn on the vehicles’ engine, the Dash Cam will
power ON and start to recording videos.
2. In the main interface, click to enter video recording
interface, click the icon “ ” to start recording. When
the icon “ ”appears and flashed , it stops recording.
3. If need to return to the main interface, click the return
icon.
Click the “function setting” to enter setting menu. Then
click “video recording” to set video recording.
4. Power off the vehicle engine, the Dash Cam will save
the recording video files and turn off the Dash Cam
automatically. The files will be saved in the TF card piece
by piece. When the card is full, the previous files will be
covered by the later files.
【NOTE】