Need help?Do you have a question about the AnyTone AT-6666 and is the answer not in the manual?
General| Frequency Range | 28.000-29.700 MHz |
|---|---|
| Power Supply | 13.8V DC |
| Antenna Impedance | 50 Ohms |
| Microphone Impedance | 600 Ohms |
| Modulation Modes | FM |
| Frequency Stability | ±5ppm |
Install a high-efficiency CB antenna, ensuring correct type and installation for optimal communication.
Connect the 13.8V power supply to the battery terminals, ensuring sufficient current for operation.
Learn how to turn the radio on/off and adjust the volume level for clear audio output.
Adjust RF Power and RF Gain settings for optimal transmission and reception performance.
Configure Squelch for noise reduction and SSB Clarifier for precise frequency tuning.
Understand how to select channels and control frequencies using the channel knob and push keys.
Utilize the MEM key to access, store, and delete memory channels for quick recall.
Switch between operating modes like FM, AM, USB, LSB, and PA using the MODE key.
Navigate through different frequency bands (A-I) using the BAND key for coverage.
Toggle between channel mode and frequency mode display using the FRQ key.
Access channel function and background function menus using the MENU key.
Initiate and control the scan function to search for active frequencies.
Activate and configure the Dual-Watch function to monitor two channels simultaneously.
To Next Page
