How to fix an AnyTone Two-Way Radio that won't turn on?
If your AnyTone Two-Way Radio will not switch on or the display remains blank after switching it on: A. The battery pack might not be properly installed. Try removing the battery pack and then reinstalling it. B. The battery power could be insufficient. Try recharging or replacing the battery pack.
What to do if I can't talk to other members on my AnyTone AT-D878UV?
If you cannot communicate with other members in your group using your AnyTone Two-Way Radio, ensure the following: 1. Verify that the frequency and CTCSS settings are identical to those of the other members. 2. Confirm that you are within the communication range and not too far from other members. 3. Ensure that you are using the correct digital mode and frequency. 4. In digital mode, verify that the correct code and encrypt group are being used for the current channel. 5. In digital mode, confirm that the correct receiving contacts and receiving group are selected.
Why am I hearing other people on my AnyTone AT-D878UV Two-Way Radio channel?
If you are hearing voices from individuals outside your group on your AnyTone Two-Way Radio, and you are using analog mode, you should change the CTCSS/DCS Tone. Ensure that all radios within your group are updated with the new tone.
Why does my AnyTone AT-D878UV Two-Way Radio battery die quickly?
If the battery of your AnyTone Two-Way Radio doesn't last long after being fully charged, the battery is likely defective and should be replaced with a new one.
General| Channels | 4000 |
|---|---|
| Battery Capacity | 3100 mAh |
| Digital/Analog | Both |
| Display | Color LCD |
| GPS | Yes |
| Bluetooth | Yes |
| APRS | Yes |
| VOX | Yes |
| Dimensions | 129 x 61 x 39 mm |
| Waterproof | IP54 |
| Frequency Range | 136-174 MHz (VHF), 400-480 MHz (UHF) |
Instructions and guidelines for charging the radio's battery pack.
Important safety cautions for handling and using the Li-ion battery.
Step-by-step guide on how to charge the battery correctly.
Details functions that can be assigned to programmable keys (PF1-PF3, P1-P2).
Instructions for turning the radio on and controlling audio volume.
Procedures for setting VFO frequencies and selecting radio channels.
Steps for creating and deleting radio channels.
How to receive, respond to, and initiate radio calls.
Configuration options for digital and analog channel parameters.
To Next Page
