22
Digital DMR and Analog UHF/VHF Two Way Radio
Start Roaming:
Fixed Time: Starts timed roaming
Out of Range: The roaming will be started when the radio cannot find a
repeater - "The repeater is out of range" icon will appear 3 times, then the
radio will perform roaming one time, and return to roaming off automatically.
(4)
Repeater Check - Off / On
Turn on this function will allow the radio to check the repeater status, the
"Repeater is out of range" icon shows if the repeater is not in range.
7.7
Settings
7.7.1
Radio Set
(1)
Beep
Beep On: The radio will beep when you press the keypad
Beep Off: No beep when you press the keypad.
(2)
Back Light
LCD backlight intensity is adjustable in 5 steps
(3)
Light Time
Always: The backlight is always on. 5S-
5Min adjustable.
Note: This function is valid when turn off the power save.
(4)
Ch. Name
CH name: The radio will work in channel mode and display the channel
name, and then the programmed VFO/ MR key is not valid.
Frequency: The radio will work in VFO mode and display the frequency,
which allows the programmed VFO/MR key to switch the VFO and Memory
channels.
(5)
Key Lock
Manual Lock: Long press the key to lock the keypad. Press key,
then press the key to unlock the keypad.
Auto Lock: Radio will auto lock the keypad when standby for a while. Press
key, then press the key to unlock the keypad.
Notice: To get the key lock function working, some options should be set
ON in CPS -> Optional Setting -> Key function first.
Knob Lock: Set On to lock the knobs.
Keypad Lock: Set On to lock the kyepad.
Side Key Lock: Set On to lock the PF1,PF2 and PF3(top blue key).
Forced Key Lock: Set On to prevent the key from unlocked. When this
To Next Page
Loading...
Need help?
General
