AnyTone AT-D878UV User Manual

7.
MAIN
MENU
FUNCTIONS
19
Digital DMR and Analog UHF/VHF Two Way Radio
7.1
Talk Group
TG List: Will display the talk group list which had been programmed in the
PC software. This list is used as a look-up table to display the contact TG
information when receiving a call.
New Contact: Allows to create a new TG.
Manual Dial: Input the group ID or private ID to access a TG quickly.
Talker Alias: Allows Alias Tx Set / Alias Rx Set.
7.2
SMS
New Msg: Create a new message and send to a contact.
InBox: Shows all the received messages, and allows forward or delete the
message.
OutBox: Shows all the sent messages, and allows resend, forward or
delete of the message.
Quick Text: Pre-saved messages, and allows to send, edit or delete the
message.
Draft: Draft messages, and allows send, edit or deleting of the message.
7.3
Call Log
Last Call: The Last Call List show the last caller ID and time information.
It allows you save the last caller as a new contact if it is not in your contact.
Sent: The Sent List shows sent messages until selected and deleted.
Answered: Shows all the answered calls, and allows deleting the call
record or saving the ID as a new contact.
Missed: Shows all the missed calls, and allows deleting the call record or
saving the ID as a new contact.
7.4
Zone
7.4.1
Select a Zone
A Zone is a group of channels grouped together. AT-D878UV(PLUS) DMR
radio has 250 Zones. A Zone can have the maximum of 160 analog and/or
digital channels.
Operation 1: Press / directly to switch the zone, the LCD will
display the selected zone number or name.
Operation 2:
(1)
Press (Menu) to enter main Menu.
(2)
Select "Zone".
(3)
Select a zone from the zone list, radio will change to selected zone.

AnyTone AT-D878UV Specifications

General

Channels	4000
Battery Capacity	3100 mAh
Digital/Analog	Both
Display	Color LCD
GPS	Yes
Bluetooth	Yes
APRS	Yes
VOX	Yes
Dimensions	129 x 61 x 39 mm
Waterproof	IP54
Frequency Range	136-174 MHz (VHF), 400-480 MHz (UHF)