35
Digital DMR and Analog UHF/VHF Two Way Radio
7.9.3
Send GPS Information
a.
When the GPS is positioning successfully, the GPS icon shows a red
color. Follow the above step to check the GPS info, press edit key to
Text edit.
b.
Press Confirm, and it will display Send or Save. If you select Save, the
GPS info will be saved as a draft message.
c.
Choose Send and it will display Contact list or Manual Dial.
d.
Select Contact list to choose a contact, press select to send the GPS
info. or
e.
Select Manual Dial, input the DMR ID, press key to switch group ID
or private ID, press to send the GPS info.
7.10
APRS Location Reporting(Supported by GPS)
(1)
Upload Type
None: No APRS.
Sel A Aprs: Select analog APRS.
Sel D Aprs: Select DMR APRS.
(2)
Ana APRS
PTT Upload: Set the PTT transmit method.
●
Off: Not transmit APRS.
●
Tx Start: Transmit analog APRS when press the PTT.
●
TX End: Transmit analog APRS when release the PTT.
Upload Power: Set the transmit power.
Upload frequency: Set the transmit frequency.
Upload text: Set the text to be shown on aprs.fi
(3)
Ana APRS Info
The received analog APRS information will be saved in radio for look back
use. Click on "Ana APRS Info" will show the received APRS information.
Click on "Delete All" will clear the information.
(4)
Digi APRS
PTT Upload: Set the PTT transmit method.
●
Off: Not transmit APRS.
●
On: Transmit DMR APRS when release the PTT.
To Next Page
Loading...
Need help?
General
