AnyTone Q8 BT User Manual

1
1.
Headset Overview
IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels
can damage your hearing. To avoid injury, set the volume to the lowest
comfortable level. If you experience ringing in your ears, or voices sound
muffled, stop using the headset. Avoid turning up the volume to block noisy
surroundings. It's possible for your ears to adapt to volume that is too high,
and this could result in permanent hearing damage without any noticeable
discomfort.
●
Check with local and state laws regarding cell phone/headset usage while
operating a motor vehicle.
●
Do not immerse any part of this product in water.
●
Plastic bags and small parts may cause choking if ingested. Keep them
away from small children and pets.
●
Use only the power cords included with this product.
●
Avoid temperatures exceeding 140
°
F (will cause equipment failure)
Battery charge port/ Sub
headset connector
Indicator lights
Power on/off
Volume switch/
Call /Play/Pause
PTT PTT
Q8 BT headset User Guide
Songs selection

AnyTone Q8 BT Specifications

Power

power supply	5V DC - 180mA

Operating Environment

operation temperature	32°F - 104°F (0 - 40°C)
store temperature	32°F - 104°F (0 - 40°C)
charge temperature	32°F - 104°F (0 - 40°C)

Summary

Headset Overview

How to Wear the Headset

Getting Started

Pairing to a Radio or Cell Phone

Connect the headset to an Anytone radio or cell phone by enabling Bluetooth and searching for the device.

Multi-Device Connection

Connect the headset to both an Anytone radio and a cell phone simultaneously for dual connectivity.

Making and Receiving Calls

Instructions for making, accepting, rejecting calls using Anytone radio or cellphone, including voice commands.

Music Playback and Control

Manage music playback, including play/pause, volume adjustment, and song selection via headset controls.

Language Switching

Change the spoken language prompts on the headset by holding specific buttons during power on.

Charging the Headset

Headset Specifications