EN 9
4 Product
specifications
Note
• Product information is subject to change
without prior notice.
General information
USB port
5V 3A 9V 3A
15V 2A
Built-in lithium battery 7.4V, 10400 mAh
Dimensions (W x H x D)
291.5×130.7×132.8mm
Operation ambient
IP protection class
0 ℃~45 ℃
IP67*
Weight (main unit)
2305g
Amplifier
Output power (RMS) 65 W
Frequency response 20 Hz - 20 KHz
Signal to noise ratio 90 dB
Speaker
Impedance 4 Ω
Maximum input power 40 W
Drivers
Bluetooth
Bluetooth version 5.3
Frequency range 2.402-2.480 GHz
Maximum
transmition power
< 10 dBm
Compatible
Bluetooth profiles
HFP V1.8
Bluetooth range up to 9 m
2 x 83 mm drivers
1 x 31 mm tweeter
Pairing for stereo mode
Two identical wireless speakers can pair
with each other for stereo sound.
*The IP67 rating means the speaker driver is
dust tight and can be submerged for up to
30 minutes at a depth of up to 1 m.
Note
• Any speaker can be used as the primary
speaker.
• The speaker connected to a Bluetooth
device can only be used as the primary
speaker.
• Before stereo pairing, make sure that the
secondary speaker is in Bluetooth
pairing mode.
•
Keep a maximum distance of 9 meters
between the speaker and your
Bluetooth device.
• In stereo mode, the button operation on
the secondary speaker is as same as that
of the primary speaker.
1 Press to power on both speakers,
and they will enter Bluetooth pairing
mode automatically. The speaker
connected to your Bluetooth device
will be used as the primary speaker.
3 Press on either speaker. The
music will be played through both
speakers.
To exit the stereo mode, press and hold
on either speaker.
Passive radiators 2
≥
2 On both speakers, press and hold
to enter stereo pairing mode until
the LED blinks white and blue
alternatively. You will hear a prompt
sound when successfully connected,
Power/Bluetooth LED of the primary
speaker is solid blue and that of the
secondary speaker is solid white.
To Next Page
Loading...