To Next Page

To Previous Page

- 8 -

SETUP STAND & BASE

Please setup or remove the base following the steps as below.

Setup:

Remove:

ADJUSTING VIEWING ANGLE

• For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's

angle to your own preference.

• Hold the stand so you will not topple the monitor when you change the monitor's angle.

• You are able to adjust the monitor's angle from -5° to 20 °

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Other manuals for AOC 2036S

Questions and Answers:

Need help?

Do you have a question about the AOC 2036S and is the answer not in the manual?

General

Pixel pitch	0.2768 x 0.2768 mm
Aspect ratio	16:9
Display diagonal	20 \
Display resolution	1600 x 900 pixels
Vertical scan range	55 - 75 Hz
Horizontal scan range	30 - 80 kHz
Viewable size diagonal	508.05 mm
Contrast ratio (dynamic)	60000:1
Viewing angle, horizontal	160 °
Display brightness (typical)	250 cd/m²
Power requirements	90 - 240V, 50 - 60Hz
Display viewable area (HxV)	442.8 x 249.075 mm
AC (power) in	Yes
USB hub version	2.0
DVI-I ports quantity	0
Power consumption (standby)	1 W
Power consumption (typical)	25 W
Certification	FCC, CE, CB, CCC, CUL, TUV/S, TUV-Bauart, ROHS, EPEAT, ISO13406-2
Product color	Black
LED indicators	Stand-by
Tilt angle range	-5 - 20 °
Panel mounting interface	- mm
Package depth	130 mm
Package width	558 mm
Package height	356 mm
Package weight	5900 g