13
OSD Setting
Basic and simple instruction on the control keys.
Luminance Image Setup Color Setup Picture Boost OSD Setup Game Setting ExitExtra
Contrast 50
Brightness 70
Eco mode Standard
Gamma Gamma 1
DCR Off
HDR Mode Off
1). Press the MENU-button to activate the OSD window.
2). Press
Left or Right to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate it, press
Left or Right to navigate through the sub-menu functions. Once the desired
function is highlighted, press
MENU-button to activate it.
3). Press
Left or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the
MENU-button while the monitor is o and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the
MENU-button while the monitor is
o and then press
power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disabled.
2). If the product screen size is 4:3 or input signal resolution is native resolution, the item of “Image Ratio” is disabled.
3). One of Clear vision, DCR, Color Boost and Picture Boost functions is activated; the other three functions are turned
o accordingly.
To Next Page
Loading...
Need help?
General
