14
OSD Setting
Basic and simple instruction on the control keys.
Luminance
Contrast 50
Brightness 80
Eco Mode Standard
Gamma Gamma1
DCR Off
HDR Mode
Off
Color Setup Picture Boost OSD Setup
ExitExtra
Game Setting
1). Press the
MENU-button
to activate the OSD window.
2). Press
Left
or
Right
to navigate through the functions. Once the desired function is highlighted, press
the
MENU-button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions.
Once the desired function is highlighted, press
MENU-button
to activate it.
3). Press
Left
or to change the settings of the selected function. Press to exit. If you want to adjust any
other function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and
then press power button to turn the monitor on. To unlock the OSD - press and hold the MENU-
button while the monitor is off and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is unable to be adjusted.
2). If the input signal resolution is the native resolution or Adaptive-Sync, then the item “Image Ratio” is
invalid.
3). Eco Modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one
state can exist.
To Next Page
Loading...
