To Next Page

To Previous Page

15" LCD Color Monitor AOC 519Sw

3.3 Adjusting the Picture

OSD Settings

1) Press the MENU-button to activate the OSD window.

2) Press- or + to navigate through the functions. Once the desired function is highlighted, press the MENU-button to

activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.

3) Press- or +to change the settings of the selected function. Press - or + to select another function in sub-menu .

Press AUTO to exit . If you want to adjust any other function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press

power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off

and then press power button to turn the monitor on.

5) Eco Mode hot key : Press the Eco key continuously to select the Eco mode of brightness when there is no OSD

( Eco mode hot key may not be available in all models).

6) Volume adjustment hot key : When there is no OSD , press Volume (+) to active volume adjustment bar, press -

or + to adjust volume ( Only for the models with speakers).

7)DCR hot key (►) : Only to press DCR key continuously is able to active or disable DCR function when there is no

OSD.

8)Auto configure hot key: When the OSD is closed, press Auto button will be auto configure hot key function .

AOC 519Sw User Manual

Questions and Answers: