8
Adjusting the monitor
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own
preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor as below:
100mm
15°15°
-5°
15°
NOTE:
Do not touch the OLED screen when you change the angle. Touching the OLED screen may cause damage.
Warning:
To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5
degrees.
1. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
To Next Page
Loading...
Need help?
General