34
Pixel Refresh
(Elimination of
image retention)
On/ Off
It is used to enable and run the Pixel Refresh
function to eliminate image retention which has
been generated.
After startup, select “Yes” according to menu
prompts, and then the display will automatically
shut down the screen. Keep power on, and
do not operate any keys. The power indicator
will ash white (white a second/o a second).
This process lasts for about 10 min. The power
indicator turns o at the end, and the display
enters standby state.
O Timer 0-24hrs Select DC o time
Image Ratio
Wide /Aspect/ 4:3/1:1
/17”(4:3) /
19”(4:3) / 19”(5:4) /
19”W(16:10) / 21.5”W(16:9) /
22”W(16:10) / 23”W(16:9) /
23.6”W(16:9) /24”W(16:9)
//27"W (16:9) /30”W (21:9)
/32”W (16:9) /34”W (21:9)
/40” W(16:9) /42” W(16:9)
Select image ratio for display.
DDC/CI Yes or No Turn On/O DDC/CI Support
Reset Yes or No Reset the menu to default
Time after Pixel
Refresh
( Time after elim-
ination of image
retention)
It refers to the time that the screen lights up after
the last Pixel Refresh operation is executed,
in units of hours. A prompt of executing Pixel
Refresh will be automatically sent to the user
every four hours.
Pixel Refresh
Counts
( Number of times
of eliminating
image retention)
It is used to record the number of times of exe-
cuting Pixel Refresh.
To Next Page
Loading...
Need help?
General