70
Note6:
If the burn software is unsuccessfulll, appear fault：
1. For VGA,the resolution will be not the best achieve.
2. For DVI,No picture，no sound.
If program failed, in VGA mode, you can’t use the optimal resolution.
When Read is OK, program is NG, pls do take following action:
1. For VGA,cut off the 9th pin (connect the monitor).
2. For DVI, cut off the 14th pin (the shortest pin, power supply).
3. Connect the EEPROM WP pin to ground.
To Next Page
Loading...
Need help?
General
