64
Step4. Click“开始”item ,Start to write HDCP, When display “Monitor 1 PASS” means Write OK.
III. Check HDCP.
USE “Blu-Ray Disc” DVD, Check the HDMI &DVI of monitor display naturally.
Note: Appear fault “
”
1. Check whether the HDCP writer is correct. Check the connection between PC, Monitor and tool. check whether
the tool’s power supply is useable.
2. Try to again if still cann’t work，please open the “CONFIG.INI”as follow：
SendHDCPLengthDelay=350
SendHDCPDataDelay=150
CheckHDCPCRCDelay=550
Start
To Next Page
Loading...
