8
3.3 OSD Menu
) Press the MENU-button to activate the OSD window.
2) Press ◄ or ► to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.
3) Press ◄ or ► to change the settings of the selected function. Press ◄ or ► to select another function in
sub-menu . Press AUTO to exit . If you want to adjust any other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on.
5）e-Sensor hot key: When there is no OSD,Press ◄ continuously to select the e-Sensor mode(e-Sensor mode hot
key may not be available in all models).
Notes:
1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to
adjust.
3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.
To Next Page
Loading...
Need help?
General
