Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1 Power 4 D-SUB
2 DP 5 Audio line in
3 HDMI 6 Earphone
To protect equipment, always turn off the PC and LCD monitor before connecting.
1 Connect the power cable to the AC port on the back of the monitor.
2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port..
3 (Optional – Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the
monitor and connect the other end to the computer’s HDMI port.
4 (Optional–Requires a video card with DP port) –Connect one end of the DP cable to theback of the monitor
and connect the other end to the computer’s DP port.
5 Turn on your monitor and computer.
6 Video contentsupporting resolution: VGA / HDMI / DP.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
12
To Next Page
Loading...
