14
OSD Setting
Basic and simple instruction on the control keys.
Luminance
Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 70
Eco Mode Standard
Gamma Gamma 1
DCR Off
HDR Mode Off
Game Setting
PIP Setting
PIP
1). Press the
Menu-button
to activate the OSD window.
2). Press
Left
or
Right
to navigate through the functions. Once the desired function is highlighted, press the
Menu-button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions. Once the desired
function is highlighted, press
Menu-button
to activate it.
3). Press
Left
or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the Menu-button while the monitor is off and then press
power button to turn the monitor on. To unlock the OSD - press and hold the Menu-button while the monitor is off
and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is unable to be adjusted.
2). DCR, Color Boost and Picture Boost, for these states that only one state can exist
To Next Page
Loading...
Need help?
General
