To Next Page

To Previous Page

Connection Equipment

T TO USE THE REMOTE CONTROL

Coaxial (RF)

Using Your Antenna or Cable for TV

1. Turn off the power to the TV.

2. Connect the coaxial (RF) connector from your antenna or cable

(out-of-the-wall, not from the Cable Box) to the TV IN connector

at the rear of the TV

3. Turn on the power to the TV.

4. Select TV using the INPUT button on the remote, side of the TV

or directly by pressing the TV button on the Remote Control.

Using the Antenna or Cable for your VCR

1. Turn off the power to the TV and VCR.

2. Connect the “Output to TV”, “RF Out” or “Antenna Out”

connector on the rear of your VCR to the TV IN connector at the

rear of the TV.

3. Turn on the power to the TV and VCR.

4. Select TV using the INPUT button on the remote, side of the TV

or directly by pressing the TV button on the Remote Control.

Note: If you have an off-air antenna or cable TV, connect it to the

“Antenna In” connector on the rear of

our VCR.

ENGLISH

AOC L19W831 User Manual

Other manuals for AOC L19W831