22
Using Component Video
Connecting your DVD Player (Better)
1. Turn off the power to the TV and DVD player.
2. Connect the Pr (red color) connector on your DVD player to the
corresponding Pr (red color) connector in the Component at the
rear of the TV.
3. Connect the Pb (blue color) connector on your DVD player to the
corresponding Pb (blue color) connector in the Component
group at the rear of the TV.
4. Connect the Y (green color) connector on your DVD player to
the corresponding Y (green color) connector in the Component
group at the rear of the TV.
5. Using an audio cable (red and white connectors), connect the
cable to the audio output connectors associated with the
Component output on your DVD player and connect the other
end to the audio connectors associated with the Component
input at the rear of the TV.
6. Turn on the power to the TV and DVD player.
7. Select Component using the INPUT button on the remote, side
of the TV or directly by pressing the COMP button on the
Remote Control.
Note: Refer to your DVD player user manual for more information
about the video output requirements of the product.
ENGLISH
To Next Page
Loading...
Need help?
General
