PREPARATION
IMPORTANT: Do not apply pressure to the screen display area which may compromise the
integrity of the display. The manufacturer’s warranty does not cover user abuse or improper
installations.
ATTACHING THE BASE
IMPORTANT: The Base of the HDTV must be assembled prior to usage.
1. Place TV unit face down on a soft and flat surface
(blanket, foam, cloth, etc.) to prevent any damage to
the HDTV.
2. Carefully align and insert the Base to the stand.
3. Insert the screws to the bottom of the base and
tighten the base to the stand.
PREPARING YOUR LCD HDTV FOR WALL
MOUNTING
We suggest that you keep your TV at least 2.56 inches (65 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need to remove the base.
For your safety, please use only with UL listed wall mount bracket with minimum weight of the
TV without stand. (Please see page.24.)
To attach a wall mount bracket to your TV:
1 Remove the screws holding your TV to the stand.
2 Pull up the stand base from the hinge and then slide out the stand base from your TV.
3 Secure the wall mount bracket to the back of your TV using four M4 screws, as indicated
in the illustration.
To Next Page
Loading...
Need help?
General
