To Next Page

To Previous Page

Connecting Your DVD Player

Using HDMI

DVD players that have a digital interface such as HDMI (High Definition

Multimedia Interface) should be connected to the HDMI input of the LCD

HDTV for optimal results.

Connecting your DVD Player (Best)

1. Turn off the power to the HDTV and DVD player.

2. Connect a HDMI cable to the HDMI output of your DVD player and the

other end to the HDMI Input at the rear of the HDTV.

3. Turn on the power to the HDTV and DVD player.

4. Select HDMI using the INPUT button on the remote, side of the HDTV or

directly by pressing the HDMI button on the Remote Control.

For DVD Players with DVI:

1. Turn off the HDTV and DVD player.

2. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the

HDMI end to the HDMI Input at the rear of the HDTV.

3. Turn on the power to the HDTV and your DVD player.

4. Select HDMI using the INPUT button on the remote or side of the HDTV,

or directly by pressing the HDMI button on the Remote.

Note:

1. Refer to your DVD player user manual for more information about the

video output requirements of the product.

2. The DVI to HDMI connection provides video only. Connection to an

alternate audio player is required for audio output.

Other manuals for AOC L42H861

Questions and Answers:

Need help?

Do you have a question about the AOC L42H861 and is the answer not in the manual?

General

3D	No
Power LED	Yes
Pixel pitch	0.4845 x 0.4845 mm
Vertical scan range	60 - 75 Hz
Headphone connectivity	3.5 mm
Digital vertical frequency	56 - 75 Hz
Digital horizontal frequency	31.5 - 60 kHz
Response time	8 ms
Display diagonal	42 \
Display brightness	500 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Contrast ratio (dynamic)	6000:1
Contrast ratio (typical)	1500:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	176 °
Supported graphics resolutions	1920 x 1080 (HD 1080)
Package depth	251.46 mm
Package width	1155.7 mm
Package height	807.72 mm
Package weight	25600 g
Certification	FCC, cULus, RoHS, TUV-S
Audio (L/R) out	1
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	2
Sustainability certificates	ENERGY STAR
Product color	Black
LED indicators	Y, Stand-by
Panel mounting interface	400 x 200 mm
Cables included	AC, VGA
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
RMS rated power	14 W
Tuner type	Analog
Analog signal format system	NTSC, PAL, PAL M, PAL N