To Next Page

To Previous Page

Connecting to a PC Computer

1. Turn off the power to the HDTV and PC Computer.

2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc

computer and the other end to the RGB PC input at the rear of the HDTV.

3. Connect the Audio Out on your pc computer to the RGB PC Audio input at

the rear of the HDTV.

4. Turn on the HDTV and PC Computer.

5. Select RGB using the INPUT button on the remote, side of the HDTV or

directly by pressing the RGB button on the Remote.

Note: For the best picture quality when connecting a PC computer through

RGB PC, set your PC computer timing mode to native resolution of panel.

Please refer to the PC or graphic card’s user guide for additional

information on how to set the timing mode and the video output

uirements of the

roduct.

Other manuals for AOC L42H861

Questions and Answers:

Need help?

Do you have a question about the AOC L42H861 and is the answer not in the manual?

General

3D	No
Power LED	Yes
Pixel pitch	0.4845 x 0.4845 mm
Vertical scan range	60 - 75 Hz
Headphone connectivity	3.5 mm
Digital vertical frequency	56 - 75 Hz
Digital horizontal frequency	31.5 - 60 kHz
Response time	8 ms
Display diagonal	42 \
Display brightness	500 cd/m²
Display technology	LCD
Native aspect ratio	16:9
Contrast ratio (dynamic)	6000:1
Contrast ratio (typical)	1500:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	176 °
Supported graphics resolutions	1920 x 1080 (HD 1080)
Package depth	251.46 mm
Package width	1155.7 mm
Package height	807.72 mm
Package weight	25600 g
Certification	FCC, cULus, RoHS, TUV-S
Audio (L/R) out	1
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	2
Sustainability certificates	ENERGY STAR
Product color	Black
LED indicators	Y, Stand-by
Panel mounting interface	400 x 200 mm
Cables included	AC, VGA
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	250 W
RMS rated power	14 W
Tuner type	Analog
Analog signal format system	NTSC, PAL, PAL M, PAL N