To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the AOC LC32D1322 and is the answer not in the manual?
Caution against using non-specified replacement parts that may cause hazards.
Specific safety guidelines for products containing laser components.
Emphasizes using only original manufacturer's replacement parts for continued reliability.
Specific instructions for safely handling the LCD module with backlight unit.
Explains the function of each button on the remote control for operating the TV.
Provides step-by-step guidance on navigating through TV menus using the remote control.
Guide for initial TV setup, including language and channel tuning.
Details advanced picture adjustment options for optimizing video quality.
Allows selection of sound modes such as Stereo, SAP, or Mono.
Adjusts backlight for optimal brightness and color saturation.
Selects the TV tuner mode, such as Cable or Antenna.
Performs automatic channel search and storage.
Selects audio modes like Stereo, SAP, or Mono.
Allows selection of the menu language.
Configures the display format for proper visualization.
Resets all configurations to factory defaults.
Blocks channels based on parental control settings.
Defines channel classifications for digital TV content.
Changes the parental control password.
Instructions for connecting analog or digital antennas to the TV.
Details on connecting DVD players via HDMI and AV (component) interfaces.
Instructions for connecting devices using HDMI for high-quality video output.
Details the operational use of each control knob on the TV's front panel.
Identifies and explains connections available on the TV's side panel.
Identifies and explains connections available on the TV's rear panel.
Connects devices using component video (YPbPr) and audio inputs.
Connects computers using VGA for video and audio signals.
Detailed instructions on how to use the controls located on the side panel of the TV.
Describes the pin assignments for a standard 15-pin color display signal cable.
Lists the pin assignments for HDMI digital connectors.
Step-by-step instructions for removing the TV's base unit.
Instructions for removing the rear cover of the LC32D1322 TV chassis.
Instructions for removing specific brackets from the assembly.
Step-by-step instructions for removing the TV's base unit.
Instructions for removing the rear cover of the LC42D1322 TV chassis.
Instructions for removing specific brackets from the assembly.
Illustrates the bezel component of the LC42D1322 TV.
Step-by-step instructions for removing the TV's base unit.
Instructions for removing the rear cover of the LE32D1322 TV chassis.
Illustrates the bezel component of the LE32D1322 TV.
Diagnostic steps for when the TV has no power and the LED is off.
Detailed layout of the main board PCB, showing component placement.
Specific layout for the key board used in the LE32D1322 model.
Specific layout for the IR board used in the LE32D1322 model.
Steps to prepare the software file and USB disk for firmware upgrade.
Procedure for connecting the USB drive and initiating the firmware upgrade.
Schematic detailing the electronic components and connections on the main board.
Schematic detailing the speaker output connections.
Schematics for analog power supply circuits.
Schematic showing the General Purpose Input/Output pins.
Circuitry for controlling the LVDS panel power.
Guidelines for impedance control and differential routing for signal paths.
Details connections for the Ethernet Data Terminal Equipment device.
List of screws and fasteners used for assembling the TV, with part numbers and quantities.
List of screws and fasteners used for assembling the LC42D1322 TV.
List of screws and fasteners used for assembling the LE32D1322 TV.
Step-by-step instructions for removing the TV's base unit.
Instructions for removing the rear cover of the LC32D1322 TV chassis.
Steps to remove main board, power board, speakers, and brackets.
Instructions for removing specific brackets from the assembly.
Instructions for separating the panel from the bezel and removing the IR board.
Illustrates the bezel component of the TV.
Step-by-step instructions for removing the TV's base unit.
Instructions for removing the rear cover of the LC42D1322 TV chassis.
Steps to remove main board, power board, IR board, speakers, and brackets.
Instructions for removing specific brackets from the assembly.
Illustrates the panel component of the LC42D1322 TV.
Illustrates the bezel component of the LC42D1322 TV.
Step-by-step instructions for removing the TV's base unit.
Instructions for removing the rear cover of the LE32D1322 TV chassis.
Steps to remove main board, power board, IR board, and speakers.
Instructions for removing the IR board, AC cover, and brackets.
Illustrates the panel component of the LE32D1322 TV.
Illustrates the bezel component of the LE32D1322 TV.
Guidelines for impedance control and differential routing for signal paths.
List of screws and fasteners used for assembling the TV, with part numbers and quantities.
List of screws and fasteners used for assembling the LC42D1322 TV.
List of screws and fasteners used for assembling the LE32D1322 TV.
General
