To Next Page

To Previous Page

7. Adjustment

7.1 Adjustment

1. Factory Mode

In the TV mode adjust volume to zero, press menu key and then press number key 1 Æ 9 Æ 9 Æ 9. It will

achieve the factory mode.

2. ADC Adjustment

In the TV mode adjust volume to zero, press menu key and then press number key 1 Æ 9 Æ 9 Æ 9. It will

achieve the factory mode. Select the item of White Balance and press right key to enter it.

1. Change TV, press the item “Current Source” to Component mode and change signal to Component TIMING

311(576i/50Hz)Pattern 185(COLORBAR), press the item “Auto Color”;

2. Change TV, press the item “Current Source” to Component mode and change signal to Component TIMING

314(720P/60Hz)Pattern 185(COLORBAR), press the item “Auto Color”;

3. Change TV, press the item “Current Source” to PC mode and change signal to PC TIMING 137(1024X768)

Pattern 42 (5 MOSAIC), press the item “Auto Color”.

3. White Balance Adjustment

1. Enter into the factory mode:(same as the above-mentioned).

2. Take an example of adjust Ypbpr_source.

a. Select item “Source”: Ypbpr and item “Color Temp”: Normal, Adjust gain of RGB to meet spec in the below

setting of tim\pat. (COMPONENT mode: TIM = 314; PAT = 141(80IRE))

b. Select item “Source”: Ypbpr and item “Color Temp”: Warm, Adjust gain of RGB to meet spec in the below setting

of tim\pat. (COMPONENT mode: TIM = 314; PAT = 141(80IRE))

c. Select item “Source”: Ypbpr and item “Color Temp”: Cool, Adjust gain of RGB to meet spec in the below setting

of tim\pat. (COMPONENT mode: TIM = 314; PAT = 141(80IRE))

3. Take an example of adjust VGA_Normal:

a. Select item “Source”: Ypbpr and item “Color Temp”: Normal, Adjust gain of RGB to meet spec in the below

setting of tim\pat. (VGA mode: TIM = 137; PAT = 141(80IRE))

b. Select item “Source”: Ypbpr and item “Color Temp”: Warm, Adjust gain of RGB to meet spec in the below setting

of tim\pat. (VGA mode: TIM = 137; PAT = 141(80IRE))

c. Select item “Source”: Ypbpr and item “Color Temp”: Cool, Adjust gain of RGB to meet spec in the below

setting of tim\pat. (VGA mode: TIM = 137; PAT = 141(80IRE))

Source VGA/YPbPr VGA/YPbPr VGA/YPbPr

Temp Normal/(7500°K) Warm/(6500°K) Cool/(9300°K)

x (center) 0.285 ± 0.020 0.313 ± 0.020 0.272 ± 0.020

y (center) 0.293 ± 0.020 0.329 ± 0.020 0.278 ± 0.020

AOC LE40H137M User Manual

Other manuals for AOC LE40H137M