Why is there only snow and noise on my AOC LED TV screen?
If only snow and noise appear on your AOC LED TV screen, check if the antenna is broken or bent. Also, consider if the antenna has reached the end of its serviceable life (3-5 years in normal use, 1-2 years at the seaside).
How to fix no color or dark picture on my AOC LED TV?
To fix the color on your AOC LED TV, press the PICTURE button to select a different Picture Mode. You can also adjust the Picture Mode options within the Picture settings.
What to do if my AOC LED TV has good picture but no sound?
If your AOC LED TV has a good picture but no sound, check the volume control and make sure that the mute function is not enabled ( is not on the screen). If you are using headphones, disconnect them. If you're using HDMI, ensure the connected equipment's audio output is set to PCM. This TV's HDMI inputs support PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits.
How to fix a noisy picture on my AOC LED TV?
To fix a noisy picture on your AOC LED TV, ensure the antenna is connected with a 75-ohm coaxial cable. Keep the antenna cable away from other cords, and use an undamaged antenna cable to avoid interference.
Why does my AOC LED TV suddenly turn off?
If your AOC LED TV turns off unexpectedly, check if the Sleep Timer is activated or confirm the Duration setting of Timer automatically. Also, verify the PC Power Management settings in General Settings.
Why do certain programs on my AOC LED TV display a loss of detail?
Loss of detail during fast-motion or dark scenes on your AOC LED TV is due to the digital compression of the source content used by certain digital broadcasts and DVDs. This may cause the TV to display less detail than usual, or cause artifacts (small blocks or dots, pixilation) to appear. These signal compressions are more visible and are dependent on the clarity and resolution of the television.
What causes a 'black box' on the screen of my AOC LED TV?
If you see a "black box" on your AOC LED TV screen, it means you've selected a text option but no text is available. To turn this off, set the CC Display option to Off. If you were trying to select closed captioning, select CC1 instead of Text1-4.
Why do black bands appear at the edges of my AOC LED TV screen?
Black bands appear on the edges of your AOC LED TV screen because some widescreen programs are filmed in aspect ratios greater than 16:9, especially common with theatrical releases. The TV will show these programs with black bands at the top and bottom. Programs in 4:3 aspect ratio will have bands on the left and right sides.
Why does the wide mode change automatically on my AOC LED TV?
The Wide Mode setting on your AOC LED TV automatically changes to the 4:3 Default setting when you switch channels or video inputs if 4:3 Default in the Screen settings is not set to Off. To lock in a Wide Mode, set 4:3 Default to Off in the Screen settings. Also, check the Auto Wide option in the Screen settings.
What to do if my AOC LED TV is locked to one channel?
If your AOC LED TV is locked to one channel, perform Auto Program to add receivable channels that are not present in the TV’s memory.
Detailed safety precautions and guidelines for operating the TV safely.
Alerts users to potential hazards like electric shock and improper usage.
Advises on preventing electric shock and potential damage from improper plug use.
Guidance on setting up the TV, including placement and wall-mounting.
Precautions against electric shock, especially with wet hands or damaged cords.
Guidelines for safely carrying the TV, emphasizing proper grip and avoiding shocks.
Emphasizes that servicing should only be done by qualified personnel.
Instructions and precautions for mounting the TV on a wall using a bracket.
Recommends unplugging during lightning storms to prevent surge damage.
Importance of ventilation slots and openings to prevent overheating.
Guidelines for using the AC power cord, including safety and damage prevention.
Advises against exposing the TV to moisture or liquids to prevent fire or shock.
Warns against overloading electrical outlets with too many appliances.
Explains the function of each button on the remote control.
High-definition multimedia interface for connecting digital audio/video equipment.
Connects a PC's video output to the TV for use as a monitor.
Step-by-step guide for assembling and attaching the TV stand base.
Detailed procedure for removing the stand and preparing for wall mounting.
How to connect cable or antenna systems for programming.
Connecting HD sources via HDMI or component video for best picture quality.
Connecting the TV to a PC using HD15 or DVI/HDMI output.
Connecting HDMI-equipped devices using HDMI cables.
Guide to initiating and completing the TV channel search.
Guide through the initial setup wizard for language and time.
Navigating the VIDEO menu to adjust picture settings.
Navigating the AUDIO menu to adjust sound settings.
Accessing PC settings for VGA input.
Accessing various features like Menu Language, Time, and Parental Control.
Configuring parental control settings like button lock and rating locks.
Solutions for when the TV displays no picture.
Troubleshooting steps for audio issues like no sound or noisy audio.
Steps to take if the TV cannot receive channels.
Common problems and solutions when connecting the TV to a PC.
Tips for improving picture quality and resolving common issues.
Solutions for dealing with noisy or distorted picture signals.
General| Screen Size | 22 inches |
|---|---|
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Speakers | 2 x 3W |
| Weight | 3.5 kg |
| Resolution | 1920 x 1080 pixels |
| Connectivity | HDMI, VGA, USB |
| Viewing Angle | 170° (Horizontal), 160° (Vertical) |
| Inputs | HDMI, VGA, Composite, Component |
| Power Consumption | <0.5W (standby) |
To Next Page
