28
Adjust PC Setting
This setting is only available in PC mode.
OK
MENU
/Exit
VGA
Move Select Return Exit
V-Position
Clock
Auto Adjust
Phase
Preset
H-Position
13
17
8
2
1
MU
/
Exit
EN
Press MENU/EXIT to call out MENU.
2
Press ▲/▼ to select “PC” , and press OK.
3
Press ▲/▼ to select PC Settings: H. Position, V. Position, Clock, Phase, Auto Adjust, Preset, and press OK to
enter.
4
Press ◄/► to adjust.
5
MU
/
Exit
EN
Press MENU/EXIT again to exit.
PC Setting Description
H. Position Adjusts the Horizontal positioning.
V. Position Adjusts the Vertical positioning.
Clock Adjusts the Clock frequency on VGA signal.
Phase Adjusts the Phase frequency on VGA signal.
Auto Adjust
Auto sync. PC timing to fit full screen display.
For detail supported timing, please refer PC Input Signal Reference Chart on page 15.
Preset Restore the default PC settings.