23
OSD Manual Setting
Channel Search
OK
MENU
/Exit
CHANNEL
Move Select Return Exit
Channel Strength
Auto CH Search
Channels List
Add on CH Search
Channel Labels
FAV Channel Setting
Cable
Tuning Band
1
MU
/
Exit
EN
Press MENU to call out MENU.
2
Press ▲/▼ to select “Channel” , and press OK.
3
Press ▲/▼ to select “Auto CH Search”, and then press OK.
The submenu of CHANNEL menu in TV mode shows as below.
1) Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2) Channel Strength: Show the intensity of the received DTV signal.
3) Auto CH Search: Automatically scan all NTSC / ATSC TV channels and then store in the channel table. In channel scan process, the OSD
can display the number of channels which had been found.
4) Add on CH Search: Add channels which are new found.
5) Channels List: Show the Channels List. User can edit (add/delete) the channel numbers.
6) Channel Labels: Show the NTSC /ATSC TV Channel Labels menu for user modifying channel labels specifically.
7) FAV Channel Settings: Show the Favorite Channel List. User can edit (add/delete) the favorite channels.
To Next Page
Loading...
Need help?
General
