- 34 -
AudioPlayer “ playlists ->My recordings” to play.
Note2: The naming rule of the recorded file: recording_Year+Month+Date+Time stamp.
8.3 Alarm
In the “Apps” interface, touch “Clock” to the clock interface.
Touch “Set alarm” to enable the alarm function.
8.3.1 Set alarm
1. Touch the preset alarm to select an alarm or touch “Add alarm” to add new alarm.
2. Touch “Time”, and set the time for the alarm. Slide your finger up and down to adjust the time,
and touch “Set” to complete.
3. Touch “Repeat,” select the date you want the alarm to ring, and touch “OK”.
4. Touch “Ringtone” and select alarm ringtone. After selection, the ringtone will be played
temporarily.
5. Touch the “Label”, set the name of the alarm.
6. Touch the “DONE” icon to go back to the alarm interface.
Tip: Touch “ ” to turn on or turn off the alarm.
Note: When it is shut down, the alarm is not affected.
8.3.2 Delete alarm
To Next Page
Need help?
General
