AOC U27P2 User Manual

9
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
U27P2
2
1
4
5
6
7
8
2
3
1. USB downstream+USB charging
2. USB downstream
3. USB upstream
4. Power switch
5. Power
6. HDMI
7. DisplayPort
8. Earphone
Connect to PC
1. Connect the power cord to the back of the display rmly.
2. Turn o󰀨 your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
To protect equipment, always turn o󰀨 the PC and LCD monitor before connecting.

AOC U27P2 Specifications

General

Screen Size	27 inches
Resolution	3840 x 2160
Panel Type	IPS
Refresh Rate	60Hz
Aspect Ratio	16:9
Brightness	350 cd/m²
Contrast Ratio	1000:1
VESA Mount	100x100 mm
Built-in Speakers	No
Ports	HDMI 2.0, DisplayPort 1.2, USB 3.2
Viewing Angle	178°/178°
Response Time	4 ms