AOC U27P2 User Manual

16
Color Setup
Picture Boost OSD Setup ExitExtra
Luminance
Red 50
Green 50
Blue 50DCB Demo Off
Color Temp. Warm
DCB Mode Off
Color Setup
Game Setting
LowBlue Mode Off
PIP Setting
PIP
Color Temp.
Warm Recall Warm Color Temperature from EEPROM.
Normal Recall Normal Color Temperature from EEPROM.
Cool Recall Cool Color Temperature from EEPROM.
sRGB Recall SRGB Color Temperature from EEPROM.
User Restore Color Temperature from EEPROM.
DCB Mode
Full Enhance On or O󰀨 Disable or Enable Full Enhance Mode
Nature Skin On or O󰀨 Disable or Enable Nature Skin Mode
Green Field On or O󰀨 Disable or Enable Green Field Mode
Sky-blue On or O󰀨 Disable or Enable Sky-blue Mode
AutoDetect On or O󰀨 Disable or Enable AutoDetect Mode
O󰀨 On or O󰀨 Disable or Enable O󰀨 Mode
DCB Demo On or O󰀨 Disable or Enable Demo
Red 0-100 Red gain from Digital-register.
Green 0-100 Green gain from Digital-register.
Blue 0-100 Blue gain from Digital-register.
LowBlue
Mode
Reading
/ O󰀩ce /
Internet /
Multimedia /
O󰀨
Decrease blue light wave by controlling color
temperature.
Note:
When “HDR Mode” under “Luminance” is set to “non-o󰀨”, all items under “Color Setup” cannot be adjusted.

AOC U27P2 Specifications

General

Screen Size	27 inches
Resolution	3840 x 2160
Panel Type	IPS
Refresh Rate	60Hz
Aspect Ratio	16:9
Brightness	350 cd/m²
Contrast Ratio	1000:1
VESA Mount	100x100 mm
Built-in Speakers	No
Ports	HDMI 2.0, DisplayPort 1.2, USB 3.2
Viewing Angle	178°/178°
Response Time	4 ms