Using the navigation keys ( and ), move the cursor to the value to be marked “value 1” and press the F1 key
(1>>).
For the second marker, press the F2 key (…) and using the navigation keys ( and ), move the cursor to the
value to be marked “value 2” and press the F1 key (2>>).
In this particular example, the graph will display values included between positions 10 and 20.
Press the F2 key twice (…), to reach the GRAPH function, then press F2 to confirm.
At this level, you can display the whole curve or a zoom around the cursor. The cursor is moved using the navigation keys
( and )
To Next Page
Loading...
