7.
Battery removing and mounting instruction
1.Unlock coded lock of battery, pull
up the red buckle, release
triangular thread hook
2.Hold the handle of battery set
and lift it up to remove the battery.
3.
When the battery is installed in the
frame, first adjust the combination lock
to "unlocked state". This step is very
important to avoid crushing the internal
iron plate.
4.
After the battery is installed in the
frame, fix the triangular hook inside the
inverted buckle, and pull down the red
buckle to fix the battery.
5. Rotate the combination lock to the locked state, and
scramble the digital wheel to complete the lock
To Next Page
