4.
Battery coded lock reset
Battery box password lock Factory password: 000
Note: When the battery box is installed in the frame, the combination lock must be
unlocked to avoid crushing the internal iron plate
Reset Instructions:
5.
How temperature affects performance
Batteries are usually above air temperature
(1)
Riding in high or low temperature
It is recommended to ride within the recommended temperature range. As with all
batteries, you may not be able to travel the same distance when the battery is cold.
(2)
Charging at high or low temperature
Your battery should be charged within the recommended charging temperature
range. It is most efficient to charge the battery within the temperature range that
the battery is suitable for. If your batteries are too hot or too cold, they may take
longer to charge, or they may not charge.
6.
Replacement battery
Your scooter is powered by a rechargeable lithium battery.Batteries have a limited
lifespan.
Near the end of their useful life, they will require more frequent charging and the
range of your scooter ride will decrease. To order replacement batteries, please
contact your distributor.
a. The password must be set in the unlocked
state (the factory default setting is 0-0-0)
b. The password reset position is in the small
hole under the outer bevel, rotate the head until
you can see the button inside
c. Push the button with a small cylindrical
object and hold it down
d. Turn the password wheel to the position
where the number you want to set is in the
middle
e. Release the button to complete the
password setting
f. Lock: Rotate to the locked state, and after
locking one or all of the code wheels, it will be
locked.
g. When unlocking, dial the set password.
Note:
After changing the new password, please try to
see if the password setting is successful and
record your new password to avoid being
unable to open if you forget your password if
you do not use it for a long time.
To Next Page
