18
CHANGING THE FUSE
Fuse in use
Spare fuse
Fuse Holder
1. Use a screw driver to pop open
the fuse holder, slide the fuse
holder out
2. Check if the fuse in use is
blown. If blown/damaged,
detach the spare fuse and
attach to the active fuse
holder. ）
3. Reattach the fuse holder.
Checking the fuse:
The Fuse can be found at the back of the unit, it is incorporated
into the AC power receptacle. If fuse is blown replace with same type
fuse only
.
Spare fuse
holder
Active fuse
holder
7
PARTS GUIDE
Hand piece receptacle
Power indicator
Heater lamp
Power cord
Main power switch
Temperature
adjustment knob
Calibration Point
To Next Page
