To Next PageTo Next Page
Need help?Do you have a question about the aoyue 968A+ and is the answer not in the manual?
General| Brand | aoyue |
|---|---|
| Model | 968A+ |
| Category | Soldering Gun |
| Language | English |
Addresses issues with significantly low air pressure, including voltage checks and microcontroller resets.
Troubleshoots 'Pen' (connection issue) and 'Err' (temperature failure) errors for the soldering iron.
Step-by-step guide for replacing the heating element in the hot air gun handle.
Provides critical warnings about potential injury and damage from misuse, high temperatures, and handling.
Initial steps for SMD reworking, including turning on the system and the SMD Rework function switch.
Details setting air temperature, starting rework, and turning off the SMD Rework function with auto-cooling.
Steps to diagnose and resolve issues when the unit has no power, including fuse and cord checks.
Addresses constant temperature display above 500°C, suggesting a faulty thermal sensor.
Troubleshoots failure of actual air temperature to increase, pointing to a broken heating element.
Addresses issues with significantly low air pressure, including voltage checks and microcontroller resets.
