Need help?Do you have a question about the Apache Labs ANAN-10+ and is the answer not in the manual?
General| Operating Modes | SSB, CW, AM, FM, Digital |
|---|---|
| Output Power | 10W |
| Voltage | 13.8V DC |
| Frequency Range | 0.1 to 30 MHz |
| Modes | SSB, CW, AM, FM, Digital |
| Weight | 2.5 kg |
| Receiver Type | Direct Sampling |
| ADC Resolution | 16-bit |
| DAC Resolution | 16-bit |
| Operating System Compatibility | Windows, Linux, macOS |
| Type | Software Defined Radio |
| Interface | Ethernet |
Details the essential hardware, software, and network configurations for operating the ANAN-10 transceiver.
Details the connectors and indicators on the front of the ANAN-10 transceiver.
Details the connectors and ports on the rear of the ANAN-10 transceiver.
Guides the user through connecting the ANAN-10 to power, antenna, and network.
Instructions for obtaining and installing the PowerSDR software package and necessary components.
Guides users through initial PowerSDR settings, network discovery, and interface familiarization.
Step-by-step guide to setting the microphone gain and related parameters for clear audio transmission.
Configuration of transmitter tune power, Voice Operated Transmit (VOX), and transmit filters.
Initial configuration of receiver settings like AGC Gain and Attenuator for optimal reception.
Methods for tuning and selecting frequencies using the Panadapter and Waterfall displays.
To Next Page
