Apache Labs ANAN-10 Users Guide
Windows
For example: On the OpenHPSDR Download webpage http://openhpsdr.org/download.php you will see:
PowerSDR Rx2 2.2.3.19 (compiled with MS VS 2010)
the current version of PowerSDR RX2 2.2.3.XX will have a current build number inserted in the place of “XX”.
cick on PowerSDR RX2 2.2.3.XX and select “RUN” to install the application. Alternatively, you can SAVE the
application in the directory of your choice.
Execute (RUN) the Installer at this time.
Note: You may be asked to install the full Microsoft .NET 4.x Framework at this time if the Installer determines
that your PC does not have the necessary .NET full 4.0 version installed. If you receive this message, chose
“O.K.” then you will get a dialogue that will indicate that PowerSDR installation failed at this point. If you have
reached this point, you must install the Microsoft .NET 4.0 Framework from HERE
http://www.microsoft.com/en-us/download/details.aspx?id=17851
Once you have Microsoft .NET 4.0 installed successfully, you can run the PowerSDR installer again to complete
this process. See the example above:
N9VV and KC9XG 12 of 42 v0.63 January 8, 2013
To Next Page
Loading...
